Instructions for the Duc_ Tape Bracelet:
Tape one piece of Duc_ Tape onto another with glue sides
together. Cut into strips of 1/2 inch wide by 4 inches long. Fold the
strip from long end to long end making a crease in the middle. Now open
up the strip and fold from each long end into the crease. (Folding 1/2
way on each side) Bringing up the folded ends should create a v shape
with a loop on each side of the upper v. Make another just like before
using a different color (if desired). With the loop top of the v shape
of one piece, insert these tops into the opening of the top loop shapes
of another v shape. Pull tightly through as much as possible (the loop
ends will now be extending past on the other side of where they
entered). Make sure the inserted piece is pushed up to the "top" of the
loop it is inserted into. Insert the third piece into the loops of
the second "inserted" piece extending the away from the original piece
when fully inserted. Continue this technique until you have reached the
desired length. Finish off by taping the last piece to the first.
Decorate as desired and enjoy!